Pioneer PDP-4340HD - Page 7

Is the system cable disconnected or almost disconnected?
Press the Plasma Display and
Media Receiver's POWER buttons
to switch power off, and then
confirm that the system cable is
correctly connected to each of
the units, referring to the figures
on the right. Switch power to the
units on after waiting for a
minute or more.
Plasma Display
7
Problem
Possible Cause
Solutions
Troubleshooting
No picture. (Continued from P.5)
Green and red rectangles appear on the screen alternately.
(Plasma Display and Media Receiver indicators flash green and red
alternately.)
Press the parts marked with
to open the hooks.
Push all the way in with
the hooks opened.
Release your fingers and
confirm that the hooks
are firmly attached to the
jack clasps.
DIGITAL OUT
OPTICAL
INPUT 1
COMPONENT VIDEO
S400
DTV-ANTENNA
IN
INPUT 3
S-VIDEO
R
-AUDIO-L R-AUDIO-L Y
AC INLET
BLACK
WHITE
SYSTEM CABLE
R
-AUDIO-L R-AUDIO-L Y
C
B /P B
C B /P B
C R /P R
C R /P R
(TS)
VIDEO
Plasma Display
(rear view)
Media Receiver (rear view)
(Almost disconnected)
System cable