Need help?Do you have a question about the Pioneer SC-100 and is the answer not in the manual?
Extremely wide, dynamic response extending beyond audible range for true high-fidelity reproduction.
Ample adaptability with various types of cartridges, including moving coil type, via head amplifier.
Precise tone control for perfect music reproduction with flat tone response.
Sharp cut-off characteristics of the filter at 12 dB per octave droop.
Employment of solid state stabilized power supply for clean and pleasing sounds.
Considerately designed structure for easy handling of input/output terminals.
Extremely high quality parts used for professional acoustic units.
Input selector switch for selecting program source: records and tapes.
Mode switch for selecting stereophonic or monophonic playing modes.
Control provided to adjust the level of sound.
Controls provided to adjust the bass and treble responses.
Lever switch that enables or disables selector/aux/tuner switches.
Switch for selecting AUX 1, TUNER, and AUX 2 inputs.
Switch for monitoring recording state or playback.
Control used to balance sound levels between left and right channels.
Attenuator switch for volume attenuation in two stages (-15dB, -30dB).
Low filter switch cuts off frequencies lower than 30 Hz or 60 Hz.
High filter switch cuts off frequencies higher than 6 kHz or 11 kHz.
The main power switch for the unit.
Auxiliary AC outlets supplying AC power up to 400W.
Output terminals for left and right channels.
Terminals for tape recording and playback or monitoring.
Auxiliary input terminals for AUX 2 and AUX 1.
Input terminal for the tuner.
Terminal for connecting the playback head of a tape recorder.
Terminals for connecting record players with magnetic cartridges.
Terminal for record players with low output voltage magnetic cartridges.
Switch to change input impedance for PHONO 2 (20kΩ, 50kΩ, 100kΩ).
Grounding terminal for preventing hum.
AC power cord connection and fuse holder.
Switch to select line voltage (117V/100V).
Guidance on selecting appropriate input circuits for various sources.
Recommendations for using volume and attenuator controls for ideal sound.
Advice on adjusting tone controls for optimal sound reproduction.
Guidance on utilizing low and high filter switches for better sound.
Illustration of channel combinations for different mode switch settings.
Instructions on using the tape monitor switch for recording and playback.
Explanation of adjustable input impedance for Phono 2.
Advice on proper input connections to prevent distortion and hum.
Advice on output connections to minimize extraneous noise.
Details on equalizer, tone controls, filters, and power supply circuitry.
Maximum output and distortion factor specifications.
Specifications for frequency response and signal-to-noise ratio.
Input terminal, input impedance, and output impedance details.
Specifications for volume control and equalizer.
Detailed specifications for bass and treble tone controls.
Detailed specifications for low and high filters.
Specifications for transistors, line voltage, power consumption, dimensions, and weight.
List of included attachments such as cords and manuals.
To Next Page
General
