Need help?Do you have a question about the Pioneer VSA-E03 and is the answer not in the manual?
Power Output| continuous power output (stereo front) | 100 W + 100 W (DIN, 1 kHz, T.H.D. 1%, 8 Ω) |
|---|---|
| continuous power output (surround front) | 60 W + 60 W (DIN, 1 kHz, T.H.D. 1%, 8 Ω) |
| continuous power output (center) | 60 W (DIN, 1 kHz, T.H.D. 1%, 8 Ω) |
| continuous power output (rear) | 60 W (DIN, 1 kHz, T.H.D. 1%, 8 Ω) |
Audio Input/Output| input sensitivity/impedance | 200 mV/47 kΩ |
|---|---|
| output level/impedance | 200 mV/2.2 kΩ |
| signal-to-noise ratio | 82 dB/62 dB |
Tone Control| bass control | ± 6 dB (100 Hz) |
|---|---|
| treble control | ± 6 dB (10 kHz) |
| loudness control | +9 dB/+7 dB (100 Hz/10 kHz) |
Video Section| input sensitivity/impedance | 1 Vp-p/75 Ω |
|---|---|
| output level/impedance | 1 Vp-p/75 Ω |
| frequency response | 5 Hz to 7 MHz dB+0–3 |
Power| power requirement | AC 220-230 V, 50/60 Hz |
|---|---|
| power consumption | 220 W |
| power consumption in standby mode | 1 W |
Weight and Dimensions| dimensions | 420 (W) × 158 (H) × 401 (D) mm |
|---|---|
| weight | 9.8 kg |
To Next Page
