Need help?Do you have a question about the Pioneer VSX-D711-K and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 5.1 |
| Frequency Response | 5 Hz - 100 kHz |
| Input Sensitivity | 200 mV |
| Digital Inputs | Optical, Coaxial |
| Power Output | 100 W per channel (8 ohms) |
| Signal to Noise Ratio | 100dB |
| Output Power (Surround) | 100W per channel |
| Audio D/A Converter | 24-bit/96kHz |
| DSP Modes | Dolby Digital, DTS |
| Input Impedance | 47 kOhm |
| Tuning Range | AM/FM |
| Input Connectors | RCA, Optical, Coaxial |
| Output Connectors | Speaker Outputs |
| Video Inputs/Outputs | Composite |
| Total Harmonic Distortion | 0.08% |
| Speaker Impedance | 8 ohms |
Warning against removing covers to prevent electric shock.
Essential checks to perform before initial unit operation.
Warning against placing flammable items on the apparatus.
Information on power disconnection and standby mode.
Importance of proper ventilation for heat dissipation.
Warning against blocking ventilation openings to prevent fire.
Specifies operating temperature and humidity limits.
Lists locations unsuitable for unit installation.
Verifying all items included in the package.
Guidelines for cable connections to prevent noise.
Instructions for correctly inserting batteries.
Precautions regarding battery usage and disposal.
Factors affecting remote control performance.
Explains home theater and surround sound concepts.
Basic steps to hook up the system for surround sound.
Connecting DVD player digitally and via video.
Connecting the receiver to the TV via video.
Note on assigning optical input for DVD.
Instructions for connecting front, center, and surround speakers.
Speaker impedance requirement of 8 to 16 Ohms.
Front speaker setting adjustment for no subwoofer.
Using TV speaker as center speaker.
Final connection check before power connection.
Connecting surround back speaker/subwoofer for VSX-D811S.
Connecting subwoofer to surround back terminals.
Correct sequence for powering on the unit and components.
Guide to using Quick Setup for system configuration.
Turning on the receiver to initiate setup.
Entering the setup menu.
Selecting speaker configuration options.
Selecting room size (Small, Medium, Large).
Final confirmation of speaker and room settings.
Connecting audio/video components and monitor TV.
Using S-video cables for clearer picture quality.
Connecting digital components using coaxial or optical cables.
Easiest way to achieve surround sound via digital input.
Note on signal direction arrows.
Special connections for LD players using RF demodulator.
Connecting analog audio components and digital to analog for recording.
Connecting decoders or DVD players with multi-channel analog outputs.
Connecting video components, including S-video for better quality.
Note on multi-channel input usage.
Note for VSX-D811S with single surround back output.
Connecting video devices to the front panel inputs.
Connecting AM loop and FM wire antennas.
How to connect and position the FM wire antenna.
How to assemble and connect the AM loop antenna.
How to connect exposed wire strands.
Improving FM and AM reception with external antennas.
Connecting an external FM antenna.
Connecting a wire for AM reception.
Instructions for connecting speakers to the VSX-D711.
How to prepare speaker wire and connect to terminals.
Using TV speaker as center speaker.
Instructions for connecting speakers to the VSX-D811S.
Adding external amplifiers to channels for more power.
Disconnecting speakers when using pre-outs.
Front speaker setting for no subwoofer.
Connecting components for remote control via receiver.
Identification of controls and indicators on the front panel.
Function of the MULTI JOG/INPUT SELECTOR dial.
Control for adjusting the main volume.
Connecting headphones and effect on speaker output.
Selecting preset radio stations.
Adjusting radio frequency.
Buttons for selecting sound modes.
Cycling through speaker system configurations.
Switching tape monitoring on/off.
Accessing and adjusting bass/treble controls.
Accessing the Quick Setup function.
Selecting video input source.
Selecting digital input for VSX-D811S.
Searching for RDS programs via EON mode.
Searching for program types in RDS mode.
Receiving radio broadcasts in mono.
Switching between AM and FM bands.
Switching between station preset banks.
Memorizing and naming radio stations.
Overview of the receiver's display indicators.
Indicators for input signal types (AUTO, SB, DIGITAL, ANALOG, DTS).
DTS signal decoding indicator.
Dolby Digital signal decoding indicator.
Pro Logic II decoding indicator.
Indicator for analog input attenuation.
Indicator for direct playback mode.
Indicator for Midnight listening feature.
Indicator for MONITOR function selection.
Indicator for RF ATT function.
Indicators for EON data service and RDS broadcast.
General character display function.
Indicator for Neo:6 processing.
Indicator for Advanced Surround modes.
Indicator for LOUDNESS feature.
Indicators for tuner status (STEREO, MONO, TUNED).
Display of current volume level.
Indicator for the currently used speaker system.
Overview of the remote control buttons.
Switching remote to receiver control mode.
Using number buttons and receiver controls via remote.
DISC button function varies by component.
Accessing functions via RCV button.
Using test tone for speaker setup.
Attenuating analog input signals.
Adjusting display brightness.
Selecting speakers for surround setup.
Adjusting surround sound levels.
Adjusting effect levels in advanced modes.
Controlling components/tuner after selection.
Switching between stereo/mono FM reception.
Direct access to radio stations.
Memorizing and naming radio stations.
Switching between AM/FM bands.
Switching between station preset banks.
Switching display modes.
Lowering input level for strong radio signals.
Controls for DVD playback and DTV functions.
Accessing DVD top menu.
Changing audio language/channel.
Displaying/changing subtitles.
Switching camera angles on discs.
Setting up remote control for other components.
Buttons for selecting receiver sound modes.
Switching between Dolby/DTS modes.
Switching between surround modes.
Switching direct playback on/off.
Selecting input source.
Selecting between input signals.
Switching to Midnight or Loudness listening.
Muting and unmuting sound.
Dedicated buttons for TV control.
Adjusting TV volume.
Selecting TV input.
Turning TV power on/off.
Receiver display flashing when command is sent.
Switching receiver between standby and on.
Using arrow buttons for setup and control.
Selecting radio presets or skipping tracks.
Adjusting listening volume.
Displaying DVD, TV, and DTV menus.
Explains basic sound options: Stereo/Direct, Standard, Advanced Surround.
Hearing source through front speakers, downmixing multi-channel.
Automatic decoding of Dolby Digital, DTS, or Dolby Surround.
Note on switching to STEREO when DIRECT is active.
Gives 4.1 channel surround sound, less sensitive to source quality.
Gives 5.1 channel surround sound, suitable for movies.
Gives 5.1 channel surround sound, suitable for music.
6.1 channel surround sound for movies.
6.1 channel surround sound for music.
Gives sound depth to stereo sources using simulated multi-channel surround.
Adds multi-channel sound to stereo sources using all speakers.
Adds multi-channel sound to stereo sources using all speakers.
Note on surround back speaker output indication.
Selecting analog/digital inputs for source components.
Using SIGNAL SEL to select input (AUTO, DIGITAL, ANALOG, DTS).
Supported digital signal formats.
Preventing digital noise with DTS sources.
Note on DVD players not outputting DTS.
Steps for listening to multi-channel audio.
Turning on the source component.
Selecting the desired source via MULTI CONTROL.
Using the STANDARD mode for decoding.
Starting playback after source selection.
Using STEREO or DIRECT modes for playback.
Switching between STEREO and DIRECT options.
Using Advanced Surround modes for effects.
Cycling through Advanced Surround sound options.
Adjusting Advanced Surround effect levels.
Using Loudness and Midnight features for listening.
Cycling through Midnight and Loudness effects.
Adjusting bass and treble using front panel controls.
Adjusting bass and treble levels.
Steps for playing other audio/video sources.
Selecting analog multi-channel inputs for surround playback.
Selecting the DVD source.
Selecting DVD 5.1ch/7.1ch inputs.
Restrictions when using multi-channel inputs.
Guide to completing receiver setup operations for surround sound.
Turning on the receiver to initiate setup.
Entering the setup menu.
Navigating setup options.
Specifying number and type of connected speakers.
Configuring surround back speakers/subwoofer setup.
Setting for 6.1 channel decoding usage.
Specifying how the subwoofer is used.
Determining frequencies sent to subwoofer/large speakers.
Specifying peak level for the LFE channel.
Setting distance from front speakers to listening position.
Setting distance from center speaker to listening position.
Setting distance from surround speakers to listening position.
Setting distance to surround back speakers.
Compressing sound track dynamic range.
Explanation of speaker abbreviations (F, C, S) and sizes (L, S).
Setting speaker size to L for >15cm cones.
Recommending 'L' for front speakers without subwoofer.
Choosing speaker setup configuration.
Setting up surround back speakers/subwoofer for VSX-D811S.
Setting for 6.1 channel decoding.
Default setting for 6.1 channel.
Selecting between 6.1 FIX and 6.1 AUTO.
Note on 6.1 channel setting restriction.
Effect of 6.1 channel setting on surround back speakers.
Choosing whether to use the subwoofer (ON, PLS, OFF).
Automatic setting of SUBWF ON.
Selecting crossover frequency.
Recommended crossover for small speakers.
Selecting attenuation level.
Note on LFE availability.
Setting front speaker distance.
Setting center speaker distance.
Note on center speaker distance restriction.
Setting surround speaker distance.
Note on surround speaker distance restriction.
Setting surround back speaker distance.
Note on surround back speaker distance restriction.
Selecting dynamic range control (OFF, MAX, MID).
Setting OFF for increased volume.
Setting MAX for low volume listening.
Choosing which channel to listen to in dual mono encoding.
Cycling through dual mono settings.
Specifying number of surround back inputs for VSX-D811S.
Selecting surround back channel input.
Assigning components to coaxial digital inputs.
Assigning coaxial digital input 1.
Assigning coaxial digital input 2.
Assigning components to optical digital inputs.
Assigning optical digital input 1.
Assigning optical digital input 2 for VSX-D811S.
Setting relative volume levels for each channel from listening position.
Entering setup mode.
Outputting test tone for speaker calibration.
Troubleshooting no test tone.
Adjusting overall volume for test tone.
Adjusting individual speaker levels.
Turning off test tone.
Adjusting speaker volume without test tone.
Test tone output limitation.
Subwoofer sound perception note.
How to tune to FM/AM radio using automatic and manual methods.
Selecting the tuner.
Switching between FM and AM bands.
Methods for tuning to a radio station.
Searching for stations automatically.
Tuning to stations step-by-step.
Performing high-speed tuning.
Using MPX for mono reception to improve sound quality.
Attenuating radio signal input to reduce distortion.
Entering station frequency directly using number buttons.
Selecting FM band for RDS search.
Initiating RDS program search.
Selecting program type.
Starting the program type search.
Confirming station selection after search.
Note on RDS search limitations.
Explains EON feature for linked broadcasts.
EON mode for traffic announcements.
EON mode for news broadcasts.
Note on EON functionality in AM band.
How to select EON modes (TA, NEWS, OFF).
Selecting FM band for EON.
Tuning to an EON FM station.
Selecting EON mode.
Note on EON mode cancellation.
Cannot search TA and NEWS simultaneously.
Restriction on using TUNER EDIT/PTY SEARCH with EON.
Turning off EON mode.
Erasing PI codes to remove memorized stations from searches.
Initiating PI code erasure.
Confirming PI code erasure.
Recording audio/video from tuner or connected sources.
Note that receiver settings don't affect recorded signal.
Selecting the source for recording.
Selecting the appropriate input signal.
Preparing the source (tuning, loading media).
Preparing the recording device and setting levels.
Starting recording and playback.
Listening to the recording as it's being made.
Switching between recorded and source signals.
Assigning preset codes to MULTI CONTROL buttons.
List of components controllable by remote.
List of buttons used for component control.
List of components controllable by buttons.
Note on cancelling setup steps.
Entering 4-digit preset codes directly.
Initiating preset code entry.
Selecting component for code entry.
Entering the 4-digit preset code.
Note on TUN button code assignment.
Repeating code entry for other components.
Searching for preset codes by cycling through batches.
Turning on the component.
Initiating code search.
Selecting component for search.
Transmitting codes and checking component response.
Restarting component after code transmission.
Scanning transmitted codes to find the correct one.
Saving the identified preset code.
Programming remote signals from other remotes.
Initiating learning mode.
Selecting component for learning.
Preparing receiver remote for signal learning.
Note on cancelling the learning process.
Aligning remotes and pressing learning button.
Sending signal from the teaching remote.
Programming additional operations.
Programming for different components.
Saving learned operations.
Note on unlearnable commands.
Note on specific unlearnable buttons.
Note on learning TV CONTROL buttons.
Erasing a single programmed button setting.
Initiating button erasure.
Selecting the button setting to erase.
Preparing remote for erasure.
Restoring all remote control settings to factory defaults.
Initiating factory reset.
Entering reset code.
Using direct function to control components independently.
Default state of direct function.
Component selection behavior with direct function on.
Initiating direct function setting.
Selecting component for direct function.
Entering direct function ON/OFF codes.
Restriction on using direct function for TV INPUT.
Checking the preset code assigned to a MULTI CONTROL button.
Initiating preset code check.
Selecting component for code check.
Displaying preset code via blinks.
Remote control functions for TVs and DTV.
List of buttons for TV control.
Description of TV control functions.
Components controllable via TV buttons.
DTV menu control buttons.
DTV menu control functions.
Components controllable via DTV menu buttons.
Note on TV CONTROL button assignment.
Remote control functions for CD/MD/VCR/DVD/LD/DVR/Cassette deck.
List of buttons for other component control.
Description of other component control functions.
Components controllable via these buttons.
Preset codes for DVD players.
Preset codes for MD players.
Preset codes for CD players.
Preset codes for LD players.
Preset codes for amplifiers.
Preset codes for miscellaneous audio equipment.
Preset codes for receivers.
Preset codes for satellite tuners.
Preset codes for cable TVs.
Solutions for common operational problems and malfunctions.
Troubleshooting no sound from surround/center speakers.
Troubleshooting no sound from surround back speakers.
Troubleshooting noise from cassette deck playback.
Troubleshooting sound issues with LD/DVD players.
Troubleshooting sound issues with DTS software.
Troubleshooting noise during DTS CD player search.
Troubleshooting remote control operation issues.
Troubleshooting dark or blank display.
Technical specifications for Amplifier, Video, FM Tuner, and AM Tuner sections.
Power requirements, consumption, dimensions, and weight.
List of included accessories.
Instructions for cleaning the device safely.
Basic cleaning instructions.
Cleaning heavily soiled surfaces.
Warnings against using chemicals for cleaning.
To Next Page
