Pioneer VSX-D701S User Manual

Operating
Instructions
AUDIO/VIDEO STEREO RECEIVER
Vox 160
MOTO D719
PIONEER numeinoee erento seems wee VSX-D7O1S
DEMO MODE |
® Illustration shows model VSX-D701S.
*® The demonstration mode is activated by turning on the power
switch while holding down the RETURN button (from power
standby condition). The demonstration will appear on the display.
® Press the POWER switch to cancel the demonstration.
* Activating the demonstration mode causes memory contents to
return to their original default condition except tuner.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how.
to operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
in some countries or regions, the shape of the power plug and power
outlet may sometimes differ from that shown in the explanatory
drawings. However, the method of connecting and operating the unit
is the same.
WARNING: To PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial nurnber for this equipment is located on the rear panel. Please
write this serial number on your enclosed warranty card and keep it in
@ secure area. This is for your security.
Note to CATV system installer
This reminder is provided to cail the CATV system instalier’s attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
[For Canadian model]
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
ATTENTION: Pour PREVENIR LES CHOCS ELECTRIQUES NE
PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR
UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT,
SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN
LAISSER AUCUNE PARTIE A DECOUVERT.
[ RETURN function
This function returns the unit to a set of initial settings and ready !
to broadcast tuner. This is helpful during troubleshooting or when
no sound is output. For details, refer to page 18.
@
PIONEER’
The Art of Entertainment

Pioneer VSX-D701S Specifications

General

Channels	5.1
Total Harmonic Distortion (THD)	0.08%
Input Impedance	47 kOhms
Weight	10.5 kg
Type	AV Receiver
Input sensitivity	200 mV
Weight (kg)	10.5
Power Output	100 W per channel (8 ohms)
Speaker load impedance	8 ohms
Video Connections	Composite, S-Video
Speaker Impedance	8 ohms
Frequency Response	5Hz to 100kHz

Summary

Safety Instructions

General Safety Guidelines

Read and follow all safety and operating instructions, heed warnings, and adhere to all instructions.

Pre-Operation Setup and Features

Switch Adjustments and Key Features

Rear Panel Facilities

Input/Output Terminals and Jacks

Description of rear panel terminals for antenna, tape, VCR, and video connections.

Front Panel Facilities

Receiver Controls and Indicators

Tuner and Preset Operations

Tuning Methods and Memory Functions

Dolby Surround and Acoustic Adjustments

Level, Delay, Effect, and Acoustic Memory Settings

Detailed steps for adjusting surround levels, delay times, effect levels, and acoustic memories.

Remote Control Operations: Receiver

Receiver Control Buttons and Functions

Remote Control: Operating Other Components

Controlling VCR, LD, TV, CD, Tuner, and Decks

Remote Control: Programming and Learning

Programming, Learning, and Initialization

Troubleshooting Common Issues

Resolving Power, Sound, and Picture Problems

Addresses common operational problems like no power, no sound, no picture, and noise.