Need help?Do you have a question about the Pioneer VSX-D712-S and is the answer not in the manual?
Warning against opening the unit and exposing it to water.
Instructions for adjusting the voltage selector switches.
Guidelines for safe and correct use of batteries.
Guide to connecting components for initial surround sound setup.
Instructions for connecting front, center, and surround speakers.
Connecting surround back speakers or subwoofers.
Information on speaker impedance and subwoofer use.
Using the Quick Setup feature for initial configuration.
Steps to initiate and configure the Quick Setup.
Adjusting settings based on room dimensions and listening position.
Selecting the correct speaker setup.
Using MCACC to calibrate listening area acoustics.
Connecting components via coaxial or optical digital inputs.
Connecting DVD decoders or players with multi-channel analog outputs.
Guidelines on speaker impedance and subwoofer integration.
Diagram illustrating speaker connections for VSX-D812/D912 models.
Connecting a subwoofer or single surround back speaker.
Detailed steps for twisting wires and inserting them into terminals.
Tips for optimal speaker positioning.
Recommendations for placing center and surround speakers.
Detailed safety instructions for handling the power cord.
Selecting SB ON, SB OFF, or SB AUTO for surround back channel playback.
Selecting VSB ON, VSB OFF, or VSB AUTO for virtual surround effect.
Specifying the number and type of connected speakers.
Configuring surround back speaker or subwoofer setup.
Specifying the subwoofer usage and bass enhancement.
Setting distances for front, center, and surround speakers.
Setting up surround back speakers or subwoofer (SB SW).
Selecting YES, PLUS, or NO for subwoofer operation.
Setting the distance for the front left speaker.
Setting the distance for the front right speaker.
Setting the distance for the center speaker.
Setting distances for surround right and left speakers.
Setting the distance for the surround back speakers.
Setting the distance for the subwoofer.
Steps to fine-tune speaker levels and channel delay using test tones.
Solutions for issues like no power, no sound, or no image output.
Procedure to reset all receiver settings to their original factory defaults.
To Next Page
General
