INTRODUCTION.
This PIPER AIRCRAFT Maintenance Manual is prepared in accordance with the GAMA (General
Aviation Manufacturers Association) format. This maintenance manual is divided into various Groups which
enable a broad separation of contents (Chapters) within each group.
The various Chapters are broken down into major systems such as Electrical Power, Flight Controls, Fuel,
Landing Gear, etc. The System/Chapters are arranged more or less alphabetically rather than by precedence or
importance. All System/Chapters are assigned a number, which becomes the first element of a standardized
numbering system. Thus the element “32” of the number series 32-00-00 refers to the System/Chapter on
“Landing Gear.” All information pertaining to the landing gear will be covered in this System/Chapter.
The major System/Chapters are then broken down into Sub-System/Sections. These sections are identified
by the second element of the standardized numbering system. The number “40” of the basic number series 32-
40-00 is for the “Wheels and Brakes” portion of the landing gear.
The individual units within a Sub-System/Section may be identified by a third element of the standardized
numbering system, such as 32-40-0l. This number could be assigned by the manufacturer to fit the coverage
requirements of the publication.
Example:
This manual does not contain hardware callouts for installation. Hardware callouts are only indicated
where a special application is required. To confirm the correct hardware used, refer to the PA-28RT-201/201T
Parts Catalog P/N 761 693, and FAR 43 for proper utilization.
Introduction
Page - 1
December 1, 1978
1A2
PIPER AIRCRAFT
PA-28RT-201 / 201T
MAINTENANCE MANUAL
CHAPTER/SYSTEM
LANDING GEAR
SUB-SYSTEMS
WHEELS AND BRAKES
INDIVIDUAL UNITS
NOSE WHEEL REMOVAL
32-40-01
To Next Page
Loading...
Need help?
General