ALPHA Electro
www.pipistrel-aircraft.com
REV.0
POH-167-00-40-150
Display Modes
EPSI570 has three different display modes/pages: Flight mode, System mode and Charge mode. The
transition from a mode to another is done by the selection knob rotation. Charge mode page is avail-
able during battery charge process.
NOTE values shown in the pictures below are for demonstrative purposes only and do not
reflect any specific real operational situation.
FLIGHT mode
FLIGHT mode is the mode used most during flight. It displays the actual operational parameters like
RPM and power kW (battery output power). This screen allows the monitoring of component status
and temperatures, battery voltage and warning messages as well.
See the picture below for a description of FLIGHT mode page.
9-5
Appendix
1 - RPM actual value, 2 - Battery state of charge (one bar per each battery), 3 - Actual menu page,
4 - Power actual value, 5 - Remaining flight time, 6 - Motor temperature,
7 - Power controller temperature, 8 - Battery temperature, 9 - Battery and aux battery voltage,
10 - System status
To Next Page
Loading...
