Pit Boss PRO Series User Manual (English)

Questions and Answers:

M
melissa05Aug 31, 2025
How to reduce excess smoke from my Pit Boss PRO Grill?
- C
  Chelsea KingAug 31, 2025
  Excess or discolored smoke from your Pit Boss Grill can be due to several reasons. Grease build-up is a common cause, so follow the care and maintenance instructions to clean the grill. The quality of hardwood pellets also matters; remove any moist pellets and replace them with dry ones. A blocked burn pot can also cause this issue, so clear it of any moist pellets and follow the auger priming procedure. Lastly, ensure the fan has sufficient air intake and is working correctly; clean it if dirty.
J
Jordan NelsonAug 31, 2025
What does the igniter error screen mean on my Pit Boss PRO?
- J
  jenniferthomasAug 31, 2025
  The igniter error screen on your Pit Boss Grill means that the igniter isn't working properly or isn't making a connection. Remove the cooking components and turn on the unit to inspect the igniter. Check that the igniter is aligned with the hole in the burn pot and is open to light the pellets. If it's not operating properly, contact Customer Care. It could also indicate igniter failure, requiring a replacement.
S
Stephanie StoneSep 1, 2025
How to fix unstable temperature on Pit Boss PRO Grill?
- M
  Micheal HicksSep 1, 2025
  If your Pit Boss Grill isn't maintaining a stable temperature, several factors could be responsible. Start by checking the fire pot for ash build-up or obstructions and ensure the fan is working correctly with no blocked air intake. Also, confirm the auger motor is operating and the auger tube is free from blockages. Next, verify that the fuel level is sufficient and of good quality, without obstructions in the feed system. Lastly, check the temperature probe for dirt or damage. If all steps have been done, start the grill, set temperature to SMOKE and wait for 10 minutes. Check that the flame produced is bright and vibrant.
W
william92Sep 1, 2025
What does the ErH error code mean on my Pit Boss PRO?
- R
  russellericSep 1, 2025
  If your Pit Boss Grill displays an ErH error code, it indicates that the unit has overheated, possibly due to a grease fire or excess fuel. To resolve this, press the Power Button to turn the unit off and allow the grill to cool completely. Then, follow the Care and Maintenance instructions. After maintenance, remove the pellets and confirm the correct positioning of all component parts. Once cooled, press the Power Button to turn the unit on again, then select the desired temperature.
B
Brandon YoungSep 1, 2025
What does Err error code mean on Pit Boss PRO Grill?
- J
  Jorge ChangSep 2, 2025
  If your Pit Boss Grill displays an Err error code, it means the temperature probe wire is not making a connection. To fix this, remove the hopper access panel and inspect the temperature probe wires for any damage. Make sure the temperature probe molex connectors are firmly and correctly connected to the control board.
N
Nancy BrownSep 2, 2025
What does the noP error code mean on a Pit Boss PRO?
- K
  Kathleen PerrySep 2, 2025
  If your Pit Boss Grill shows a noP error code, there may be an issue with the meat probe connection. Try disconnecting the meat probe from the connection port on the Control Board and reconnecting it, ensuring the adapter is firmly connected and undamaged. Also, check the meat probe wires for any signs of damage.
L
Linda MillerSep 2, 2025
What does the ErP error code mean on my Pit Boss Grill?
- A
  Angela KhanSep 2, 2025
  If your Pit Boss Grill is showing an ErP error code, it indicates that the unit wasn't turned off properly the last time it was connected to power. To resolve this, press the Power Button to turn the unit off, wait two minutes, and then press the Power Button again to turn it back on. Then, turn the Temperature Control Dial to SMOKE or your desired temperature.
J
Jennifer MorrisSep 2, 2025
Why is my Pit Boss Smokers producing too much smoke?
- K
  kjohnsonSep 2, 2025
  If your Pit Boss smoker is producing excess or discolored smoke, it could be due to several reasons: * Grease build-up: Follow the Care and Maintenance instructions. * Wood pellet quality: Remove moist wood pellets from the hopper and clean it out, then replace with dry wood pellets. * Blocked fire pot: Clear the fire pot of moist wood pellets. * Insufficient air intake: Check the fan to ensure it's working properly and the air intake isn't blocked. Clean the fan if dirty, following Care and Maintenance instructions.

Pit Boss PRO Series Specifications

General

Fuel Type	Wood Pellets
Temperature Control	Digital Control Board
Temperature Range	180°F to 500°F
Material	Steel
Grill Grates	Porcelain-coated cast iron
Ignition	Automatic
Warranty	5-year limited
Cooking Area	Varies by model
Hopper Capacity	Varies by model
Weight	Varies by model
Dimensions	Varies by model