Pitco I12 - 5 To Change Options Level 2 ( for the Store Manager); Fahrenheit or Celsius Display; Password Change or Required

Solstice I12 Cooking Computer
Pitco P/N 60149514
L20-379 Rev 0 Page 14 of 24
1
2
0
5 To Change Options Level 2 ( for the Store Manager):
With no cook timers running, displays will show one of the following displays:
; , or .
 Press the key. The left display will show . The right display will
be blank.
 Press the [0] key to access level 2 options when manager password is not set,
otherwise, enter password
using the product keys as a numeric
keypad for entry.
 Display will show . Product key
indicators will illuminate to prompt operator to select a key. This
section details parameters that may be changed in Level 2
programming.
5.1 Fahrenheit or Celsius Display:
The Controller will display temperatures in the Fahrenheit or Celsius scales. The default scale is °F.
 Display shows .
 Press product key [1], display shows [DEGREE n] [F OR C], where “n” is the current
setting.
 Use the product key [0] to scroll through choices (F or C). Press key to save
choice.
 Display shows .
5.2 Password Change or Required
With factory settings, an operator password is not required to enter programming Levels 1 and 2.
The password may be activated or changed in these steps.
 Display will show .
 Press product key [2], display shows . Use the product key
[0] to scroll through choices
or . Press key to save
choice.
 If is selected Display returns to .
 If is selected, display will show [PASSnnnn] [NEW PASS] to prompt for new
password. Displayed value “----” is the current password. Use the product keys for numeric
entry to change password. Press [P] key to save choice. Display then shows
.