Pitco I12 - Beeper Volume and Tone; Language Selection; Melt Cycle Type

Solstice I12 Cooking Computer
Pitco P/N 60149514
Page 15 of 24 L20-379 Rev 0
4
5
Note: The factory default password (6684) will always work even if a different password is selected here.
5.3 Beeper Volume and Tone:
Volume and Tone of the beeper alarm may be changed in this section. Volume ranges are 1,2 and
3, where 3 is the loudest setting. This model also has a selection for tone.
 Display will show . Press product key [3], display shows
[VOLUME n] [BEEPER].
 Use the product key [0] to scroll through choices (n= 1,2,3, or T). Beeper volume will
change as each selection is made.
 If “T” is selected an additional display is shown, [TONE n] [BEEPER]. Use the product key
[0] to scroll through choices (n= 1,2,3). Beeper tone will change as each selection is made.
 Press key to save choice. Display shows .
5.4 Language Selection:
Display will show .
 Press product key [4], display shows .
 Use the product key [0] to scroll through choices (ENGLISH, ESPANOL,
FRANCAIS, DEUTSCH, HOLLAND).
 Press key to save choice. Display shows .
5.5 Melt Cycle Type:
This adjustment allows selection of the melt cycle type and requirement when starting the
appliance from a cold start.
Display will show
.
 Press product key [5], display shows , the default setting.
 Use the product key [0] to scroll through choices (liquid, solid, or, no melt).
 Press key to save choice. Display will again return to
.
3