If using USB interface, shielded I/O cables must be used with this
equipment to ensure compliance with the limits. Use of unshielded cables is
prohibited.
Product: Direct Thermal Label Printer
Model: PB-SP100
Power Requirements: 100-240 VAC, 50/60 Hz, 1.5 A
Sound Level: < 70 dba Operating
Temperature: 32-104°F (0-40°C)
For more information, visit our website at
pitneybowes.com/uk/support
It is certified that the system complies with all applicable Directives of
the European Union.
For a formal Declaration of Conformity please contact Compliance
Engineering. Contact information is given in this guide or on a separate
document supplied with your system.
The system has been designed to work on all Pan-European
Telecommunication Networks.
Pitney Bowes Installation Instruction November,2020 Page 17 of 17
To Previous Page
