Safety Information
Mechanical
• Keep fingers, hair, and loose articles of clothing clear of gears and moving parts.
• Never pick up the robot while it is moving or the servo motors are running.
• Remove any burrs caused by cutting the metal beams.
Electrical
• Make sure the power is turned off when the robot is not in operation.
• Do not operate the robot in a wet environment.
• Always power down the robot before making any changes.
• Use caution when working with bare wires to avoid creating a short circuit situation.
• Route wires carefully, and secure them if necessary to avoid damage to the wire or its insulation.
• Mount the battery pack and remote receiver securely.
4
To Next Page
Loading...
