EasyManua.ls Logo

Pivothead PV52891720 - Page 12

Pivothead PV52891720
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 MP or 3 Megapixels Photos offers the smallest memory storage requirement
We recommend you to keep the 8MP setting unless you really have to take a lot
of pictures. Please see our online user manual to understand the impact of
choosing lower Image Size for Image Quality.
Focus:
The focus setting allows the Recorder to adjust the lens to obtain the sharpest
picture. The Pivothead HDHF Recorder has the following options:
Auto: The Recorder will focus from 4' to infinite. This setting can be used when
the distance to the subject/action is greater than 3 1/2' (default setting).
Macro: The Recorder will focus on the shortest possible distance. This setting
can be used when the subject is within 3 1/2' from you.
Time Lapse Burst:
The Time Lapse Burst offers you with the option to take pictures at different time
intervals. This mode can be used when you want to take pictures during an event
without keeping pushing the Photo Button. Pressing the Photo Button will start
the Time Lapse Burst capture. Once activated, pressing the Photo Button will
stop the Time Lapse Burst capture. The Recorder has the following options:
1 Shot every second
1 Shot every 30 seconds
4 shots every 8 seconds
4 shots every 30 seconds
10 shots every 30 seconds
5 shots every 60 seconds
Auto Burst Capture (Continuous):
The Burst Capture allows you to quickly take more than one photo when pressing
the Photo button once. This setting can be used to capture the different
movement of an action, like the shot of a basketball player, etc. The Recorder
comes with the following options:
3 Quick Shots
5 Quick shots
10 Quick shots
16 Quick shots (it takes ~1.2 seconds to take the 16 shots)
Remark: The focus setting is set to Auto Focus, the focus time can oscillate
between 1 to 1.5 seconds. The first picture will be taken after the focus is finished.
Face Tracking:
If activated, the focus in Auto, will target the face(s) if detected