Frames Per Second setting is recommended for quick action recording. The
memory storage for the same recording time will increase, as will the power
consumption.
1080@30 fps -> highest resolution setting for general recording (default setting).
720@60 fps -> highest Frames Per Second setting, for quick action recording.
720@30 fps -> highest duration storage and the lower battery consumption.
Pivothead Watermark:
Select ON to add the Pivothead watermark in the Right Bottom corner of your
video. Select OFF otherwise.
TIME/DATE Stamp
Select ON to print the time and date of the recording onto the video while
recording. Select OFF otherwise.
EV COMPENSATION
The Exposure setting allows you to improve the Video quality in extreme light
conditions. Auto setting is the best choice for most situations.
Low Light-Dim: To be used while recording indoor with poor light or at night time
Bright Outdoors: To be used while recording during very sunny outdoor activities
or when the environment causes lot of reverberations (skiing, sea activities)
l) Photo Manual Setting
Photo while recording Video:
It is possible to take photos during video recording. The photo settings will be
taken according to video setting (meaning that if your setting for video is color
and for photo black and white, a photo taken during the video recording mode will
be in color and not in White and black).
In 1080p recording, the photo resolution will be 2 Megapixels. In 720p modes,
the resolution will be 1 Megapixels.
Image Size:
The Image Size (or Resolution) stands for the size of the picture. The larger the
resolution setting, the clearer your picture will be is. A higher resolution will need
more memory storage as well. The recorder comes with the below Image Sizes:
8 MP or 8 Megapixels offers the highest quality Photos (default setting)
5 MP or 5 Megapixels offers a compromise between the quality and the memory
storage requirement
To Next Page