X P 1 M I N S T A L L E R G U I D E
3
General Description
Product Overview
The XP1M controller is designed to be a flexible 1 door access control system,
capable of standalone or networked operation. The system can control up to
50,000 personnel (expandable), has 128 time profiles and alarm monitoring
options with separate alarm output relays.
Each unit features 3 extended alarm inputs for monitoring third party
equipment and standard alarm input devices (such as door contacts and PIRs).
The built in real time clock and system memory are both battery backed on the
circuit board and using the built-in PSU charger option (if fitted) all systems are
also backed up against mains failure. Mains supplies are filtered and suppressed
to protect against spurious noise and surges.
When off-line from the main PC, events are logged in the system RAM and the
last 2000 transactions will be buffered until they can be up-loaded to the host
system when comms is restored.
The XP1M controller is housed in a steel cabinet with provision for cable entry
through the rear panel or side walls. All external connections to the main board
utilise demountable terminal blocks.
The system is compatible with most types of card reader; technologies
supported range from Mag-stripe, Wiegand Swipe and Proximity through to
the more sophisticated Biometric and Contactless Smart Card solutions. The
controller has built-in enhanced support for the latest in multiple-reading long
range RFID tagging.
To Next Page
Loading...