Auto-Installation | 35
Four sample batch files are provided with the Dome DX display driver.
The content of each file, shown here, illustrates the use of these switches.
fastinst.bat
setup.exe -s -f2%TEMP%\fastinst.log
uninst.bat
setup.exe -s -f1un_install\setup.iss -f2%TEMP%\uninst.log -remove
sample1.bat
setup.exe -s -f2%TEMP%\sample1.log -bit8 -noddraw -static -noautodetect
sample2.bat
setup.exe -s -f2%TEMP%\sample2.log -bit8 -notstatic -yesddraw –noautodetect
To Next Page
Loading...
