Planar PT3290PW - Control through RS232; RJ45 Pin Defination in Display Side; COM Port Setting in PC Side; COM Command Structure from PC Side

Control through RS232
1. RJ45 pin definition on display side:
Pin No. Name
1 NC
2 NC
3 NC
4 RXD (Receiving data)
5 TXD (Transmit data)
6 GND
7 NC
8 NC
2.1 COM port setting in PC side:
PROTOCOL RS-232C
BAUD RATE 9600 (bps)
DATA LENGTH 8 (bits)
PARITY BIT NONE
STOP BIT 1 (bit)
FLOW CONTROL NONE
Pin 8 Pin 1
2.2 COM command structure from PC side:
Header Message Check code Delimiter
Header: specify the start of this command package.
Message: command body, it comprises OP code page, OP code, parameters, checksum.
Delimiter: end of package.
* The detail structure statement, please refer the command format sheet.
13
Type of connector: RJ45 8-pin male: