Usage Notice
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
� Turn off the product before cleaning.
� Touch screen surface may be cleaned using a soft clean cloth moistened with mild
window glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
� Use a soft cloth moistened with mild detergent to clean the display housing.
� Disconnect the power plug from AC outlet if the product is not going to be used for
an extended period of time.
Don’t:
� Do not touch the LED Display screen surface with sharp or hard objects.
� Do not use abrasive cleaners, waxes or solvents for your cleaning.
� Do not operate the product under the following conditions:
○ Extremely hot, cold or humid environment.
○ Areas susceptible to excessive dust and dirt.
○ Near any appliance generating a strong magnetic field.
○ In direct sunlight.
1
� Do not use over 16 hours per day.
� If smoke, abnormal noise or odor emits from your Touch LED LCD Monitor, remove the power cord
immediately and call your service center.
� Never remove the rear cover of your Touch LED LCD Monitor. The display unit inside contains
high-voltage parts and may cause electric shock.
� Never try to repair your Touch LED LCD Monitor yourself. Always call your service center or a
qualified technician to fix it.
� Due to safety concerns, if the VESA mounting kit is purchased separately, pleasemake sure the
mounting kit is UL-listed, and replaceable only by service personnel.
To Next Page
Loading...