PT3290PW Driver Installation Instructions:
If you are using a PC running, Windows® 7/8/10, follow the instructions below:
1. Power on the PC.
2. Make sure that the USB cable is connected to the computer.
3. Windows® 7/8/10: For Projected Capacitive，the driver is a mouse emulation driver. If your
Windows version is Windows 7 or later, there is no need to install this driver. There is a HID touch
digitizer build-in driver in Windows 7/8/10.
If you are using a PC running driver Linux kernel 2.6.x (32 bit & 64 bit),
follow the instructions below:
1. Power on the PC.
2. Make sure that the USB cable is connected to the computer.
3. Visit www.planar.com/support.
4. Follow the step-by-step instructions as shown on the pop-up windows.
If you are using a PC running Linux or Apple
®
Mac OS, follow the
instructions below:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the zipped file at www.planar.com/support.
23
To Next Page
Loading...