10
ENGLISH
AUX-IN OPERATION
PATV65 can play audio from any device that has a 3.5mm headphone audio jack.
1) Power on the PATV65 by pressing and holding down the POWER
7
button for
2 seconds
2) Connect the 3.5mm AUX-IN on the MFU to a 3.5mm adaptor
10
(3.5mm adaptor is not included)
3) The controller LED lighting will automatically change to RED, indicating the system is in
AUX-IN mode
4) Bluetooth devices will remain paired even in AUX-IN MODE
5) Route the audio wires back to a convenient stowage place, secure your device.
VOLUME CONTROL
1) To raise the VOLUME press UP
2
button
2) To lower the VOLUME press DOWN
1
button
3) To MUTE / UN-MUTE the VOLUME press PLAY/PAUSE
4
button
AUX-INPUT
YOUR DEVICE
Turn the HEADPHONE volume level on your device to it’s 100% level
Tips:
To Next Page
Loading...
Need help?
General