Need help?Do you have a question about the Planet FGSW-4840S and is the answer not in the manual?
Guides on how to install the FGSW-4840S and connect it to the network.
Provides step-by-step instructions for installing the switch on a desktop or shelf.
Explains how to mount the FGSW-4840S switch in a 19-inch standard rack.
Covers manual setup, installing the Web Switch Utility, and its basic functions.
Details utility toolbar, discovery, monitor lists, device settings, and firmware upgrades.
Guides login, port, VLAN, trunking, status, and system settings.
Explains trap, password management, backup/restore, and factory reset procedures.
Guides on how to install the FGSW-4840S and connect it to the network.
Provides step-by-step instructions for installing the switch on a desktop or shelf.
Explains how to mount the FGSW-4840S switch in a 19-inch standard rack.
Covers manual setup, installing the Web Switch Utility, and its basic functions.
Details utility toolbar, discovery, monitor lists, device settings, and firmware upgrades.
Guides login, port, VLAN, trunking, status, and system settings.
Explains trap, password management, backup/restore, and factory reset procedures.
General| Model | FGSW-4840S |
|---|---|
| Type | Managed Switch |
| VLAN Support | Yes |
| Power Supply | AC 100-240V, 50/60Hz |
| Weight | 3.5 kg |
| Switch Architecture | Store-and-Forward |
| MAC Address Table | 16K |
| Power Consumption | 30W |
| Jumbo Frame Support | Yes |
| Uplink Ports | 4 x SFP |
| Jumbo Frame | Yes |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40 to 70 °C |
| Humidity | 10% to 90% (non-condensing) |
| Ports | 48 x 10/100/1000BASE-T RJ45 |
To Next Page
