Need help?Do you have a question about the Planet IGS-801T and is the answer not in the manual?
General| Switch type | Unmanaged |
|---|---|
| Switch layer | L2 |
| Quality of Service (QoS) support | Yes |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Stackable | - |
| Certification | FCC, CE |
| Product color | Blue |
| Rack mounting | No |
| Housing material | Metal |
| International Protection (IP) code | IP30 |
| Power consumption (typical) | 6.72 W |
| Heat dissipation | 23 BTU/h |
| Operating temperature (T-T) | -40 - 75 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e, Cat6 |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Throughput | 11.9 Mpps |
| Jumbo frames | 9000 |
| MAC address table | 4000 entries |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 87 mm |
|---|---|
| Width | 32 mm |
| Height | 135 mm |
| Weight | 476 g |
Lists the components included in the product package.
Explains the structure and content of the user manual.
Describes the industrial Gigabit Ethernet Switch's design and capabilities.
Describes how to install the Industrial Gigabit Ethernet Switch.
Explains the function and structure of the switch's address table.
Describes how the switch learns source addresses and updates its table.
Details the process of forwarding and filtering network packets.
Explains the Store-and-Forward packet forwarding technique used by the switch.
Describes the auto-negotiation feature for setting connection speeds and duplex modes.
Details the pin assignments for the switch's RJ-45 ports for 1000Mbps and 10/100Mbps.
Explains the pin allocation and color coding for straight-through and crossover Ethernet cables.
To Next Page