Need help?Do you have a question about the Planet G.SHDSL Bridge/Router GRT-402 and is the answer not in the manual?
General| WAN Interface | G.SHDSL |
|---|---|
| Standards | IEEE 802.3, IEEE 802.3u, ITU-T G.991.2 |
| G.SHDSL Standard | ITU-T G.991.2 |
| Protocol | PPPoE |
| Security | Firewall |
| Management | SNMP |
| Power Supply | 12V DC |
| Operating Temperature | 0°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
Lists key software features of the GRT series, highlighting its capabilities for SOHO users.
Details the physical and technical specifications of the GRT series devices, including ports, power, and dimensions.
Explains the function and meaning of each LED indicator on the front panel of the GRT series.
Describes the connectors and their functions located on the rear panel of the GRT series device.
Provides step-by-step instructions for connecting the GRT series device to power and network components.
Outlines the three methods to access the GRT series for configuration: Serial, Telnet, and Web interface.
Guides users through the steps to configure the GRT series for operation in Bridge Mode.
Details the configuration process for Routing Modes, including PPPoA, PPPoE, IPoA, and EoA.
Covers advanced configuration settings for SHDSL, WAN, NAT/DMZ, and Virtual Server parameters.
Explains how to use the Command Line Interface for system configuration and management tasks.
Details configuration options for system mode, SHDSL, WAN, LAN, DHCP, and other setup parameters.
Describes methods to secure the GRT series, including Telnet port configuration and legal client IP address restrictions.
Provides instructions on how to upgrade the GRT series firmware using TFTP.
To Next Page