Planet G.SHDSL Bridge/Router GRT-402 - Click Next to Write the New Setting; Enter DHCP Client End IP: 192.168.0.51; Enter DHCP Client Start IP: 192.168.0.2; Enter DNS Server: 192.168.0.1

PLANET Technology Corp. GRT-101/401/402 User’s Manual
6. Enter DHCP Client Start IP: 192.168.0.2
7. Enter DHCP Client End IP: 192.168.0.51
8. Enter DNS Server: 192.168.0.1
9. The DNS server is embedded in GRT series.
10. Click Next to write the new setting.
11. Enter WAN1 VPI: 0 and VCI: 32.
12. Select WAN1 AAL5 Encap: LLC
13. Select: IPoA, IPoA + NAT, EoA, or EoA + NAT
14. Click Next
15. Enter WAN1 IP: 10.1.2.1
16. Enter WAN1 Subnet Mask: 255.255.255.0
17. Enter Default Route Gateway: 10.1.2.2
18. Enter DNS Server: 168.95.1.1
- -
17