Need help?Do you have a question about the Planet GS-4210-24P2S and is the answer not in the manual?
General| Number of Uplink Ports | 2 |
|---|---|
| Port/Expansion Slot Details | 24 x Gigabit Ethernet Network, 2 x Gigabit Ethernet Expansion Slot |
| Media Type Supported | Twisted Pair, Optical Fiber |
| Ethernet Technology | Gigabit Ethernet |
| Number of Total Expansion Slots | 2 |
| Expansion Slot Type | SFP |
| Number of SFP Slots | 2 |
| Layer Supported | Layer 2 |
| Manageable | Yes |
| PoE Power Budget | 220 W |
| Switching Capacity | 52 Gbps |
| Forwarding Rate | 38.69 Mpps |
| MAC Address Table | 8K |
| Jumbo Frame | 9K |
| Power Supply | Internal |
| Operating Temperature | 0°C to 50°C |
| Humidity | 5% to 95% non-condensing |
| Network Technology | 10/100/1000Base-T |
| Input Voltage | 100 - 240 VAC, 50/60 Hz |
| Dimensions | 440 x 44 mm |
| Storage Temperature | -10°C to 70°C |
| Management | Web-based, SNMP |
| Power Source | AC |
Details requirements for establishing a serial port connection for switch configuration.
Outlines the necessary conditions for connecting the switch via an Ethernet network.
Steps to view the switch's current IP address, subnet mask, and gateway.
Procedure to set a new IP address, subnet mask, and default gateway.
Instructions for accessing the switch's web interface using default credentials.
To Next Page