Planet GS-4210-24P2S - Recovering Back to Default Configuration

14
9.RecoveringBacktoDefaultConguration
 IP Address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP Address “192.168.0.100” or reset the
login password to default value, press the reset button on the front panel for
about 10 seconds. After the device is rebooted, you can login the Web interface
managementwithinthesamesubnetof192.168.0.xx.
1 3 5 7 9 11 13 15 17 19 21 23
2
PoE
PWR
RESET
4 6 8 10 12 14 16 18 20 22 24
25
26
ACTLNK1000
ACTLNK100
PoE
GS-4210-24P2S
ACTLNK1000
ACTLNK10/100
PoE In-Use
Figure 9-1: GS-4210-24P2S Reset Button