6
4. Logon to the Console
Once the terminal is connected to the device, power on the PoE Managed Switch
and the terminal will run self testing procedures. Then, the following message
asks to login user name and password. The factory default user name and
passwordareshownasfollowsandtheloginscreeninFigure4-1appears.
Username:admin
Password:admin
Figure 4-1: PoE Managed Switch Console Login Screen
The user can now enter commands to manage the PoE Managed Switch. For a
detaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.
To Next Page
Loading...
