Need help?Do you have a question about the Planet GS-4210-24T2S and is the answer not in the manual?
General| Switch type | Managed |
|---|---|
| Switch layer | L2 |
| Quality of Service (QoS) support | Yes |
| SFP module slots quantity | 2 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| 10G support | No |
| Networking standards | IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Security algorithms | HTTPS, SNMP |
| Throughput | 38.6 Mpps |
| Jumbo frames | 9216 |
| MAC address table | 8000 entries |
| Supported network protocols | IPv4/IPv6 IP-based ACL / MAC-based ACL |
| Stackable | - |
| Form factor | 1U |
| Certification | FCC Part 15 Class A, CE |
| Product color | Blue |
| LED indicators | Link, Power, System |
| Housing material | Metal |
| Input current | 0.8 A |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 14 W |
| Heat dissipation | 47 BTU/h |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 207 mm |
|---|---|
| Width | 445 mm |
| Height | 45 mm |
| Weight | 2100 g |
Provides instructions for installing the switch on a desktop or in a rack.
Details how to configure the switch's IP address, subnet mask, and gateway.
Covers configuring port settings, counters, bandwidth, mirroring, and error handling.
Explains how to configure Link Aggregation Groups (LAGs) and LACP.
Covers VLAN concepts, IEEE 802.1Q, Q-in-Q, GVRP, and VLAN examples.
Details STP theory, global settings, port settings, and instance configurations.
Explains QoS features like classification, queuing, policing, and rate limiting.
Covers storm control, 802.1X, DHCP snooping, ARP inspection, IP source guard, and DoS.
Explains MAC-based, IPv4-based, and IPv6-based ACLs and ACEs.
Covers cable diagnostics, system status, ping tests, and traceroute.
Explains PoE technology, standards, and powered devices.
Details factory default reset, reboot, backup, upgrade, and configuration management.
To Next Page
