User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Button
: Click to apply changes.
Figure 4-4-9: LACP Information Page Screenshot
The page includes the following fields:
Object Description
• State
Display the current LACP disable/enable status.
• System Priority
Display the current system priority.
4.4.5 LACP Port Setting
This page is used to configure the LACP port setting. The LACP Port Setting screens in Figure 4-4-10 and Figure 4-4-11 appear.
Figure 4-4-10: LACP Port Setting Page Screenshot
The page includes the following fields:
Object Description
• Port Select
Select port number for this drop down list to set LACP port setting.
• Priority
The Prio controls the priority of the port.
If the LACP partner wants to form a larger group than is supported by this device
then this parameter will control which ports will be active and which ports will be
in a backup role.