User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figure 2-1-11, Figure 2-1-12 and Figure 2-1-13 show their rear panels.
Rear Panel
Figure 2-1-11: Rear Panel of GS-4210-16T2S/GS-4210-24T2S
Rear Panel
Figure 2-1-12: Rear Panel of GS-4210-48T4S
Rear Panel
Figure 2-1-13: Rear Panel of GS-4210-16P2S and GS-4210-24P2S
■ AC Power Receptacle
For compatibility with electrical outlet in most areas of the world, the Managed Switch’s power supply automatically adjusts
to line power in the range of 100-240V AC and 50/60Hz.
Plug the female end of the power cord firmly into the receptacle on the rear panel of the Managed Switch. Plug the other
end of the power cord into an electrical outlet and the power will be ready.
Power Notice:
The device is a power-required device, which means it will not work till it is powered. If your networks
should be
active all the time, please consider using UPS (Uninterrupted Power Supply) for your device.
It will prevent you from network data loss or network downtime.
Power Notice:
In some areas, installing a surge suppression device may also help to protect your Managed Switch
from being damaged by unregulated surge or current to the Managed Switch or the power adapter.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
