EasyManuals Logo

Planet GS-4210-24T2S User Manual

Planet GS-4210-24T2S
431 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #395 background imageLoading...
Page #395 background image
Users Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
395
6. Command Line Mode
The CLI groups all the commands in appropriate modes according to the nature of the command. A sample of the CLI command
modes are described below. Each of the command modes supports specific software commands.
The
following screen based on GS-4210-24P2S will be t he same as that of GS-4210-16T2S, GS-4210-24T2S
,
GS
-4210-48T4S and GS-4210-16P2S.
Mode-based Command Hierarchy
The Command Line Interface (CLI) groups all the commands in appropriate modes by the nature of the commands. Examples
of the CLI command modes are described below. Each of the command modes supports specific switchs commands.
The CLI Command Modes table captures the command modes, the prompts visible in that mode and the exit method from that
mode.
Command Mode Access Method Prompt
Exit or Access Previous
Mode
User Mode
This is the first level of access.
Perform basic tasks and list
system information.
GS-4210-24P2S> Enter exit command
Privileged Mode
From the User Mode, enter the
enable command.
GS-4210-24P2S #
To exit to the User Mode, enter
exit .
Global Config Mode
From the Privileged Mode,
enter the configuration
command.
GS-4210-24P2S
(Config)#
To exit to the Privileged Mode,
enter the exit command.
Table 6-1: CLI Command Modes
The CLI is divided into various modes. The commands in one mode are not available until the operator switches to that
particular mode. The commands available to the operator at any point in time depend upon the mode. Entering a question mark
(?) at the CLI prompt, and displayss a list of the available commands and descriptions of the commands.

Table of Contents

Other manuals for Planet GS-4210-24T2S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet GS-4210-24T2S and is the answer not in the manual?

Planet GS-4210-24T2S Specifications

General IconGeneral
Switch typeManaged
Switch layerL2
Quality of Service (QoS) supportYes
SFP module slots quantity2
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
10G supportNo
Networking standardsIEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Security algorithmsHTTPS, SNMP
Throughput38.6 Mpps
Jumbo frames9216
MAC address table8000 entries
Supported network protocolsIPv4/IPv6 IP-based ACL / MAC-based ACL
Stackable-
Form factor1U
CertificationFCC Part 15 Class A, CE
Product colorBlue
LED indicatorsLink, Power, System
Housing materialMetal
Input current0.8 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)14 W
Heat dissipation47 BTU/h
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 95 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth207 mm
Width445 mm
Height45 mm
Weight2100 g

Related product manuals