User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
4.6.6 MST Instance Configuration
This page allows the user to configure MST Instance Configuration. The MST Instance Setting, Information and Status screens
in Figure 4-6-13, Figure 4-6-14 and Figure 4-6-15 appear.
Figure 4-6-13: MST Instance Setting Page Screenshot
The page includes the following fields:
Object Description
• MSTI ID
Allow assign MSTI ID. The range for the MSTI ID is 1-15.
• VLAN List (1-4094)
Allow assign VLAN list for special MSTI ID. The range for the VLAN list is 1-4094.
• Priority
Controls the bridge priority. Lower numerical values have better priority. The
bridge priority plus the MSTI instance number, concatenated with the 6-byte MAC
address of the switch forms a Bridge Identifier.
Button
: Click to apply changes.
Figure 4-6-14: MSTI Instance Setting Information Page Screenshot
The page includes the following fields:
Object Description
• MSTI
Display the current MSTI entry.
• Status
Display the current MSTI status
• VLAN List
Display the current VLAN list.
• VLAN Count
Display the current VLAN count.
• Priority
Display the current MSTI priority