EasyManuals Logo

Planet GS-4210-24T2S User Manual

Planet GS-4210-24T2S
431 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #361 background imageLoading...
Page #361 background image
Users Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
361
4.13 Diagnostics
This section provides the system CPU/momory usage status and IP layer network diagnostics tool for troubleshoot. The
diagnostic tool is designed for network manager to help them quickly diagnose problems between point to point and better
service customers.
Use the Diagnastics menu items to display and configure basic administrative details of the Managed Switch. Under System the
following topics are provided to configure and view the system information:
This section has the following items:
Cable Diagnostics
System Status
Ping Test
IPv6 Ping Test
Trace Router
4.13.1 Cable Diagnostics
The Cable Diagnostics performs tests on copper cables. These functions have the ability to identify the cable length and
operating conditions, and to isolate a variety of common faults that can occur on the Cat5 twisted-pair cabling. There might be
two statuses as follow:
If the link is established on the twisted-pair interface in 1000BASE-T mode, the Cable Diagnostics can run without
disruption of the link or of any data transfer.
If the link is established in 100BASE-TX or 10BASE-T, the Cable Diagnostics cause the link to drop while the
diagnostics are running.
After the diagnostics are finished, the link is reestablished. And the following functions are available.
Coupling between cable pairs.
Cable pair termination
Cable Length
Cable Diagnostics is only accurate for cables of length from 15 to 100 meters.

Table of Contents

Other manuals for Planet GS-4210-24T2S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet GS-4210-24T2S and is the answer not in the manual?

Planet GS-4210-24T2S Specifications

General IconGeneral
Switch typeManaged
Switch layerL2
Quality of Service (QoS) supportYes
SFP module slots quantity2
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
10G supportNo
Networking standardsIEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Security algorithmsHTTPS, SNMP
Throughput38.6 Mpps
Jumbo frames9216
MAC address table8000 entries
Supported network protocolsIPv4/IPv6 IP-based ACL / MAC-based ACL
Stackable-
Form factor1U
CertificationFCC Part 15 Class A, CE
Product colorBlue
LED indicatorsLink, Power, System
Housing materialMetal
Input current0.8 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)14 W
Heat dissipation47 BTU/h
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 95 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth207 mm
Width445 mm
Height45 mm
Weight2100 g

Related product manuals