Need help?Do you have a question about the Planet IGS-604HPT-M12 and is the answer not in the manual?
General| Enclosure | Metal |
|---|---|
| Humidity | 5% to 95% (non-condensing) |
| MAC Address Table | 8K entries |
| Jumbo Frame | 9K bytes |
| Switch Capacity | 12Gbps |
| Throughput | 8.9Mpps |
| Product Type | Industrial Gigabit Ethernet Switch |
| Ports | 2 x 100/1000BASE-X SFP |
| PoE Standard | IEEE 802.3af/at |
| Operating Temperature | -40 to 75°C |
| Mounting Type | DIN-rail |
| Storage Temperature | -40°C to 85°C |
| Standards Compliance | IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.3af, 802.3at |
| LED Indicators | Power, PoE, Port Link/Act |
Outlines the physical, hardware, layer 3 IP routing, layer 2, QoS, and multicast features.
Provides step-by-step instructions for physical installation and connection.
Details the procedure to reset the switch to its factory default settings.
Explains how to manage the switch using a web browser interface.
Covers basic administrative details, including system information, IP configuration, and logs.
Allows configuration of IPv4/IPv6 interfaces, IP routes, and DNS settings for the switch.
Covers configuration and status monitoring for the switch's ports.
Allows configuration of port connection settings such as speed, duplex, and flow control.
Explains Virtual Local Area Network concepts and configuration options.
To Next Page
