Planet IGS-604HPT-M12 User Manual

User’s Manual of IGS-604HPT-M12
274
4.12.2 Access Management
Configure access management table on this page. The maximum entry number is 16. If the application's type matches any one
of the access management entries, it will allow access to the switch. The Access Management Configuration screen in Figure
4-12-2 appears.
Figure 4-12-2: Access Management Configuration Overview Screenshot
The page includes the following fields:
Object Description
Indicates th
e access management mode operation. Possible modes are:
 Enabled: Enable access management mode operation.
 Disabled: Disable access management mode operation.
 Mode
Check to de
lete the entry. It will be deleted during the next apply .
 Delete
Indicates the VLAN ID for the access man
agement entry.
 VLAN ID
Indicates th
e start IP address for the access management entry.
 Start IP address
Indicates th
e end IP address for the access management entry.
 End IP address
Indicates the host can access
the switch from HTTP/HTTPS interface that the
host IP address matched the entry.
 HTTP/HTTPS
Indicates the host can access
the switch from SNMP interface that the host IP
address matched the entry.
 SNMP
Indicates the host can access
the switch from TELNET/SSH interface that the
host IP address matched the entry.
 TELNET/SSH
Buttons
: Click to add a new access management entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

Planet IGS-604HPT-M12 Specifications

General

Brand	Planet
Model	IGS-604HPT-M12
Category	Network Router
Language	English