User’s Manual of IGS-604HPT-M12
54
4.2.4 Users Configuration
This page provides an overview of the current users. Currently the only way to login as another user on the web server is to
close and reopen the browser. After setup is completed, press the “Apply” button to take effect. Please login web interface with
new user name and passwordas Figure 4-2-4 shows.
Figure 4-2-4: Users Configuration Screenshot
The page includes the following fields:
Object Description
User Name
The name identifying the user. This is also a link to Add/Edit User.
Privilege Level
The privilege level of the user.
The allowed range is 1 to 15. If the privilege level value is 15, it can access all
groups, i.e. that is granted the fully control of the device. But others value need to
refer to each group privilege level. User's privilege should be same or greater
than the group privilege level to have the access of that group.
By default setting, most groups privilege level 5 has the read-only access and
privilege level 10 has the read-write access. And the system maintenance
(software upload, factory defaults and etc.) need user privilege level 15.
Generally, the privilege level 15 can be used for an administrator account,
privilege level 10 for a standard user account and privilege level 5 for a guest
account.
Buttons
: Click to add a new user.
Add/Edit User
This page configures a user – add, edit or delete user.
To Next Page
Loading...
Need help?
General
