PLANET Technology Corp. GRT-101/401/402 User’s Manual
SNMP
Simple Network Management Protocol (SNMP) is the protocol not only
governing network management, but also the monitoring of network devices
and their functions.
GRT series can generate SNMP traps to indicate alarm conditions, and it relies
on SNMP community strings to implement SNMP security. This gateway
support MIB II.
Click SNMP to configure the parameters.
In the table of current community pool,
you can setup the access authority.
In the table of current trap host pool,
you can setup the trap host.
Press Modify to modify the community
pool.
SNMP status: Enable
Access Right: Deny for deny all access
Access Right: Read for access read
only
Access Right: Write for access read
and write.
Community: it serves as password for
- -
30
To Next Page
Loading...
Need help?
General
