PLANET Technology Corp. GRT-101/401/402 User’s Manual
the Internet. SNTP can be used when the ultimate performance of the full NTP
implementation.
For SNTP, select SNTP v4.0.
SNTP service: Enable
Time Server: All of the time server around the world can be used but suggest
to use the time server nearby.
Time Zone: you have to choose the right time zone.
Press Finish to finish the setup. The browser will prompt the configured
parameters and check it before writing into GRT series.
Config Tool
This configuration tool has three functions: load Factory Default, Restore
Configuration and Backup Configuration.
Press Config Tool.
Choose the function and then press finish.
¾ Load Factory Default function: it will load the factory default parameters to
the gateway.
Note: If this function is chosen, and activated. All of the settings in GRT series
will be restored to factory default configurations.
¾ Restore Configuration: Sometime the configuration will be crushed
unintentionally. Restore configuration will help you to recover the backup
configuration easily.
Click Finish after selecting Restore Configuration.
Browse the route of backup file then press finish. GRT series will
automatically restore the saved configuration.
¾ Backup Configuration: After
configuration, suggest to use
the function to backup your
router parameters in the PC.
Select the Backup
Configuration and then press
Finish.
Browse the place of backup file named backup. Press Finish. GRT series will
automatically backup the configuration.
- -
32
To Next Page
Loading...
Need help?
General
