Planet GS-5220-8P2T2S - Recovering Back To Default Configuration

14
5.RecoveringBacktoDefaultConguration
IPaddresshasbeenchangedoradminpasswordhasbeenforgotten–
To reset the IP address to the default IP address “192.168.0.100” or reset the
loginpasswordtodefaultvalue,pressthehardwareresetbuttononthefrontpanel
for about5 seconds. After the device is rebooted,you can login the management
Webinterfacewithinthesamesubnetof192.168.0.xxx.
PWR
10 12
9 11
ACT
1000 LNK
Reset
Console
115200,N,8,1
GS-5220-8P2T2S
8-Port 10/100/1000T 802.3at PoE
+
2-Port 10/100/1000T
+
2-Port 100/1000X SFP Managed Switch
2 4 6 8
1 3 5 7
PoE
ACTLNK
PoE-in-Use
ACT
10/100 LNK
Reset Button
Figure 5-1: GS-5220-8P2T2S Reset Button