22
Step 5: After the brackets are attached to the 802.3at PoE+ Switch, use suitable
screws to securely attach the brackets to the rack, as shown in Figure
3-3.
1
PWR
5 9 13 17 21
3 7 11 15 19 23
PoE
2 6 10 14 18 22
4 8 12 16 20 24
PoE
24-Port 10/100/1000T
802.3at PoE
+
2-Port Gigabit
SFP Ethernet Switch
SFP
26
4 6 82
1 3 5 7
12 14 1610
9 11 13 15
20 22 2418
17 19 21 23
PoE Port Status
GSW-2620VHP
PoE In-Use
ACTLNK1000
ACTLNK10/100
ACT
LNK
SFP
25 26
25
Standard
VLAN
Extend
Figure 3-3: Mounting the 802.3at PoE+ Switch in a Rack
Step 6: Proceed with Steps 4 and 5 of session 3.1 Desktop Installation to
connect the network cabling and supply power to your Switch.
3.3 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP slot of the
802.3at PoE+ Switch.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug in and
out the transceiver to/from any SFP port without having to power down the
802.3at PoE+ Switch, as the Figure 3-4 shows.
MGB-Series Module
LC Fiber Cable
1
2
Figure 3-4: Plug In the SFP Transceiver
To Next Page
Loading...
