Planet GT-915A - Recovering Back To Default Configuration

9
4.RecoveringBacktoDefaultConguration
IP address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP Address “192.168.0.100”
or reset the login password to default value, press the hardware-based
reset button on the front panel for about 10 seconds. After the device
is rebooted, you can log in the management Web interface within the
same subnet of 192.168.0.xx.
ACT
LNK
100/1000X
10/100/1000T
Managed Media Converter
100/1000X to 10/100/1000T
PWR 1000
RESET
TPFiber
LNK/ACT