720p SIP Multi-unit Video Door Phone with RFID and PoE
HDP-5240PT
39
Auto Provision
General Configuration File
Encryption Key
Encryption key for common configuration file
Save Auto Provision
Information
Save the auto provision username and password in the phone until the
server URL is changed
DHCP Option
Option Value
The equipment supports configuration from Option 43, Option 66, or a
Custom DHCP option. It may also be disabled.
Custom Option Value Custom option number. It must be from 128 to 254.
SIP Plug and Play (PnP)
Enable SIP PnP
If it is enabled, the equipment would send SIP SUBSCRIBE messages to
the server address when it boots up. Any SIP server compatible with that
message would reply with a SIP NOTIFY message containing the Auto
Provisioning Server URL where the phones can request their
configuration.
Server Address PnP Server Address
Server Port PnP Server Port
Transportation Protocol PnP Transfer protocol – UDP or TCP
Update Interval Interval time for querying PnP server. Default is 1 hour.
Static Provisioning Server
Server Address
Set FTP/TFTP/HTTP server IP address for auto update. The address can
be an IP address or domain name with subdirectory.
Configuration File Name
Specify configuration file name. The equipment would use its MAC ID as
the config file name if this is blank.
Protocol Type Specify the Protocol type FTP, TFTP or HTTP.
Update Interval Specify the update interval time. Default is 1 hour.
Update Mode
1. Disable – not to update
2. Update after reboot – update only after reboot.
3. Update at time period – update at periodic update period
TR069
Enable TR069 Enable/Disable TR069 configuration
ACS Server Type Select Common or CTC ACS Server Type.
ACS Server URL ACS Server URL.
ACS User User name of ACS.
ACS Password ACS Password.
TR069 Auto Login Enable/Disable TR069 Auto Login.
To Next Page
Loading...
Need help?
General
