Planet IFGS-1822TF - Product Specifications

6
2.ProductSpecications
Product
IFGS-1822TF
Hardware Specications
Fast Ethernet Copper Ports 16 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
Gigabit Ethernet Copper
Ports
Two 10/100/1000BASE-T RJ45 auto-MDI/MDI-X
ports
(shared with Port 17 and Port 18)
SFP Slots
Two 1000BASE-SX/LX/BX SFP interfaces
(shared with Port 17 and Port 18)
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount kit
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin
5/6 for Power 2
Alarm
One relay output for power failure.
Alarm relay current carry ability: 1A @ 24V DC
Dimensions (W x D x H) 66 x 107 x 152 mm
Weight 870g
Power Requirements Dual 12~48V DC, 24V AC
Power Consumption Max. 6.3 watts/21.4BTU (Ethernet full loading)
ESD Protection 6KV DC
Switching Specications
Switch Architecture Store-and-Forward
Switch Fabric 7.2Gbps (non-blocking)
Throughput
(packet per second)
5.36Mpps@ 64 bytes
Address Table
16K entries, automatic source address learning
and aging
Shared Data Buer 4Mbits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex