Planet IGS-5225-4T2S - Console Terminal Setup

9
5. Logging on to the Console
Once the terminal has been connected to the device, power on the
IndustrialManagedSwitchandtheterminalwilldisplay“runningtesting
procedures”.
Note
The following terminal configuration of IGS-5225-8P4S is
taken for an example.
Then, the following message asks to log in user name and password.
The default user name and password are shown as follows and the
loginscreeninFigure5-1appears
Username:admin
Password: admin
Figure 5-1: Console Login Screen