Planet IPOE-E302 - Product Specifications

16
5.ProductSpecications
Model IPOE-E302
HardwareSpecications
Network Connector
PoE in Port
- 1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++
“Data + DC” in
- Auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE out Port
- 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/bt
PoE++ “Data + DC” out
- Auto MDI/MDI-X, auto-negotiation RJ45 connector
Switch Architecture Store-and-Forward switch architecture
MAC Address Table 2K MAC address table with auto learning function
DataBuer 1Mbit
Switch Fabric 6Gbps
Switch Throughput 4.46Mpps @ 64Bytes
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 9Kbytes
ESD Protection
Air 8KV DC,
Contact 6KV DC
Surge Protection 6KV
Enclosure IP67-rated and IK10 aluminum case
Installation Wall-mount ear
LED Display LNK/ACT LED x 3
Dimensions
(W x D x H)
150 x 43.8 x 72.94 mm
169.85 x 43.8 x 72.94 mm, with cable gland
Weight
339g
372g (with three waterproof cable glands)
Power Consumption 95.6 watts / 326.2BTU (Full loading with PoE function)