Planet IVC-2004PT - LED Indicators for IVC-2004 PT

12
z 2.1.1 LED Indicators for IVC-2004PT
The diagnostic LEDs on the front panel provide the operating status of
individual port.
z System
LED Color Function
P1 Green Light Indicates power 1 has power.
P2 Green Light Indicates power 2 has power.
Fault Green Light
Indicates either power 1 or power 2 has no
power.
z VDSL / BNC
LED Color Function
ACT Green
Light Indicates that the VDSL link is established
Blink
Indicates that the VDSL link is actively
sending or receiving data over that port.
Sync Green
Light Indicates that the VDSL link is established
Fast
Blink
Indicates that the VDSL link is at training
status (about 10 seconds).
Slow
Blink
Indicates that the VDSL link is at idle
status.
Master Green Light
Indicates the VDSL Bridge is running at
Master mode.
Slave Green Light
Indicates the VDSL Bridge is running at
Slave mode.
z 10/100Base-TX with PoE Port
LED Color Function
LNK/
ACT
Green
Light Indicates that the port is linked up.
Blink
Indicates that the Extender is actively
sending or receiving data over that port.
Off Indicates that the port is linked down.
PoE
In-Use
Orange Light
Indicates the port is providing 48V DC
in-line power. (1-4 ports).