Planet IVC-2004PT - Wall Mount Plate Mounting

24
z 3.6.2 Wall-mount Plate Mounting
To install the PoE Industrial Ethernet Extender on the wall, please
follow the instructions described below.
Step 1: Remove the DIN-Rail from the PoE Industrial Ethernet
Extender; loose the screws to remove the DIN-Rail.
Step 2: Place the wall-mount plate on the rear panel of the PoE
Industrial Ethernet Extender.
Step 3: Use the screws to screw the wall-mount plate on the PoE
Industrial Ethernet Extender.
Step 4: Use the hook holes at the corners of the wall-mount plate to
hang the PoE Industrial Ethernet Extender on the wall.
Step 5: To remove the wall-mount plate, reverse the above steps.