Planet WGSW-28040 - Recovering Back To Default Configuration

13
9.RecoveringBacktoDefaultConguration
 IP Address has been changed or admin password has been forgotten –
To reset the IP address to the default IP Address “192.168.0.100” or reset the
login password to default value, press the reset button on the front panel for
about 10 seconds. After the device is rebooted, you can login the Web interface
managementwithinthesamesubnetof192.168.0.xx.
28G Managed Switch
PWR
SYS
115200, N, 8, 1
Console
RESET
2 6 10 14 18 22
4 8 12 16 20 24
1 5 9 13 17 21
3 7 11 15 19 23
WGSW-28040
ACTLNK
1000
Figure 9-1: WGSW-28040 Reset Button