Chapter 3: General Configuration
The Configuration Utility appears as an icon on the system tray of Windows while the card is
running. You can open the utility by double-click on the icon.
Right click the icon; there are some items for you to operate the configuration utility.
Lauch Config Utilities: open the Configuration Utility tool.
Use Zero Configuration as Configuration Utility: use Windows XP built-in wireless
configuration utility (Windows Zero Configuration) to configure the card.
Switch to AP Mode: the WNL-U554A can act as an AP. Please refer to next chapter for
details.
Exit: close the Configuration Utility tool.
To Next Page
Loading...
